Welcome to the official website of Shenzhen Chenzhou Electric Co., Ltd.!
Contact: Mr. Xiong Minghan (General Manager)
Add: 3rd and 4th floors, Building 15A, Changxing Science and Technology Industrial Park, Changzhen Community, Yutang Street, Guangming District, Shenzhen
phone：18926546421
Tel：86 0755 27803432
Fax：86 0755 22141522
E-mail：xmhyb2003@aliyun.com
Web：www.nbwhore.com
Generally speaking, the temperature below 40 degrees can make the pump run normally, if the temperature is too high, it will affect the use of the brushless DC pump . In a relatively high temperature environment, it is necessary to design the driving device motor for the pump, because the temperature of the conveying medium will be transmitted to the motor through the driving device and the rotating shaft. The brushless DC water pump requires a heat sink to reduce damage to the equipment.
The reason why the bearing temperature of the brushless DC pump is too high
1. The lubricating oil does not meet the application requirements, and there may be impurities in the lubricating oil. Generally, the lubrication of bearings has a fixed lubricating oil, and other lubricating oils cannot be used. So smooth oil cannot be added wrong.
2. If the pump shaft and the motor shaft are not installed concentrically, the bearing temperature may be too high. It is also possible that the user did not install the motor during the process of purchasing the motor by himself. You only need to re-correct the concentricity of the pump shaft and the motor shaft.
3. The damage of the bearing or the poor quality may also affect the application. If the wear of the bearing is found to be serious, it needs to be replaced in time.
Shenzhen Chenzhou Electric Co., Ltd.
6th Floor, Building 55, Tianliaolang Qingli Industrial Park, Guangming New District, Shenzhen
Contact: Mr. Xiong Minghan (Benny) (General Manager)
Phone: 86 0755-27803432
Phone: 18926546421
Email: xmhyb2003@aliyun.com
Scan and follow the official WeChat account